power tools

Let me start out with a brief explanation of what biscuit joinery is, a biscuit, in this context, is a small oval piece of wood about 1/8 inch thick and comes in varying lengths. Of course you will need a biscuit joiner as well, this is a power tool that has a small circular saw blade that cuts into the edge of a piece of wood to the proper depth and shape to accept the biscuit.

circular saw

The circular saw is a metal disc or blade sometimes with saw teeth on the edge as well as the machine that causes the disk to spin. It is a tool for cutting wood or other materials and may be hand-held or table-mounted. It can also be used to make narrow slots (dados). Most of these saws are designed with a blade to cut wood but may also be equipped with a blade designed to cut masonry, plastic, or metal.

Drill


A drill or drill motor is a tool fitted with a cutting tool attachment or driving tool attachment, usually a drill bit or driver bit, used for drilling holes in various materials or fastening various materials together with the use of fasteners. The attachment is gripped by a chuck at one end of the drill and rotated while pressed against the target material. The tip, and sometimes edges, of the cutting tool does the work of cutting into the target material. This may be slicing off thin shavings (twist drills or auger bits),







hand plainer
A plane is a tool for shaping wood. Planes are used to flatten, reduce the thickness of, and impart a smooth surface to a rough piece of lumber or timber. Planing is used to produce horizontal, vertical, or inclined flat surfaces on workpieces usually too large for shaping


                                                 



router

 

A router is a woodworking tool used to rout out (hollow out) an area in the face of a piece of wood. It was a tool particularly used by pattern makers and staircase makers and consisted of a broad-based wooden hand plane with a narrow blade projecting well beyond its base plate gaining it the nickname Old Woman's Tooth. Although the original hand tool has a few advantages over the power tool equivalent and retains favour with some workers, since about 1960, it has all but been replaced by the modern spindle router, which was designed for the same work, although the first electric hand routers appeared in the years just after World War I

jigsaw
A jigsaw is a tool used for cutting arbitrary curves, such as stenciled designs or other custom shapes, into a piece of wood, metal, or other material. It can be used in a more artistic fashion than other saws, which typically cut in straight lines only. In this way, it is similar to the rasp and the chisel. Although a jigsaw can be used to cut arbitrary patterns, making a straight cut freehand is difficult even with a guide.

drop saw
The basic miter saw is the manual miter saw. It is a saw suspended on rollers in a metal guide that works with a miter box that allows making accurate crosscuts and miter cuts. They are still used occasionally, such as in picture framing or by manual woodworking enthusiasts, but have largely been displaced by power tools in woodworking.